I know this sounds like a zen koan but to be consistent, don't worry about consistency. A description of the desired outcome is not a strategy for achieving it.

An actual strategy: track all of the blockers. You say that your sprints "go wrong" but that isn't a helpful observation. If you track why it goes wrong - write down the start and end time any time you get stuck, blocked, confused, waiting on others, dealing with unforeseen issues, "tech debt", etc.

This is not a failure, it's a vital signal! The time spent on blockers are literally what's standing between you and consistency. Address them head on with empirical data. You should be able to estimate the risk for any new change based on how much time you wasted in the past working on that subsystem. It's a clear choice. Slog through the problems again and deliver inconsistent results - or fix it and deliver consistently.

You do have to be selective - don't just fiddle with the code until it's pretty - fix only the observed problems that stand in the way of delivery. "Make the change easy, then make the easy change" - Kent Beck.

I think part of this is you have to know yourself. I imagine there are some people out there who can really sort of discipline themselves into doing a good job - through checklists or really good review processes.

Personally I do everything in my power not to be disciplined. I intentionally make my first draft terrible. I almost make it my goal to write bad code instead of good code(. I’m an SRE not a full time developer for what it’s worth)

And then I sort of find adversarial ways to circle around the solution. Write tests etc. I don’t know how to describe it but I never want a close eye or “discipline” to be the solution to the problem. Use tools for linting/schema validation/testing and trust them and when they don’t catch something evolve them.

It’s funny you say “rarely, but sometimes I have bad weeks”. Whereas I approach it the opposite. Sure every once in a while I have a good week where I don’t make many mistakes. But I approach my work like making mistakes is the rule, not the exception. And lean into it.

And I will say it would be crazy of me to say that in all this time I haven’t developed a pretty good eye. I certainly catch a lot of things people with less experience don’t, and my first drafts are much better now then they were earlier in my career. But I don’t rely on that experience, because I’m fallible.

You will continually get better at not just writing the right code, but at interpreting requirements into the right code. You will learn the edges and corners where bugs will hide. And sometimes you'll write them anyways, because that's life. You'll fix it in the future.

In this trade, a lot of orgs put a lot of emphasis on "sprints" and "deliverables", but you really have to look at software development as a continuum. Optimizations and bug fixes are a part of this continuum, and any good team has space for these things in planning.

Not all teams recognize this, however, and I would recommend discussing with the other engineers on your team how you can work together to advocate for this. No sprint can be 100% features. Software requires upkeep. Bugs are a natural part of this.

Sounds to me like you need to do more testing. You should have automatic integration tests that run with your CI/CD pipeline to make sure you don't break seemingly unrelated bits, and most importantly you need to actually test the application like a real user - like QA will test it - before you merge. Writing code that works is only half the battle. You need to test it and get it ready for production before you merge. Most importantly you need a robust test suite with >90% coverage, to avoid breaking things by accident. Focus on making sure your code is stable, rather than trying to get each task done as quickly as possible.

It's great to have bugs because they become your next sprint.

My advise is to get out of the sprint ecosystem pressure if possible you need time and space to make/fix bugs. The focus should be on the overall deadline not a two week package. Trying to align with that creates issues.

The other is to pick a stack that you can pivot with.

This is literally what seniority/experience means.

This is why more experienced developers get paid more — because the deliver more consistent, higher quality, less issues work.

You work more, on more projects etc. and you eventually grow. Doesn't matter at all which tricks, approaches do you use.

The best investment in you quicker growth - is to find bigger, more complex and important project to tackle, and better team.

A big part of this is QA flagging the bugs. Humans make mistakes, and testing is there to catch them. The goal is not to ship the bugs to the customer, not to never make mistakes.

This does not mean that there is nothing you can do to prevent bugs, but try to let go of the idea that bugs should never reach QA. That's what they're there for, and if you add another layer of QA between your work and them, you've basically doubled the work done without improving anything that gets shipped to the customer. And all for the sake of your ego to never have a sprint go wrong.

Small pieces of software incrementally delivered is the key.

Never ship a big feature at once

This comment and many of the replies are ridiculous. Bugs are part of the process and so is QA. Having only a handful over a few years probably means you spent too much time trying to make it perfect. You will see fewer problems the more time you have to work on a feature or test it, but in my opinion if you consistently get to zero then that is inefficient because it delays the feedback from the user. Or it means you have a really well funded organization that can afford a lot of development time on each item but is probably wasting money.

You have the "luxury" of a QA team, unlike many developers. Take advantage of that. Don't feel bad just because you see a bug once a year (which I don't believe is accurate reporting on your part).

Four bad moments in five years? You should tell us your secret.

All kinds of things can go wrong when programming. Sometimes you don't have control over them. Very often you can't reliably predict them. You get better at knowing yourself and what to watch out for with experience, but even the most experienced programmers run into unexpected issues. And have bad days or weeks.

Remove the small errors to stay focused on the big ones. Use typed languages, linters, unit tests and the like.

Don’t trust your future self to remember anything. Not that the logic needs updating in multiple places (single source of truth!), not the steps of a process (scripts!), and not what you need to do (lists and flight checks!)

When something goes wrong, treat it as a learning experience and set up a countermeasure. Mistakes shouldn’t happen twice.

I like to write down any mistakes I make or see myself make, since I don't always have a QA team, but I'm not exactly trying to prevent the mistake.

I think of the thoughts in my head like LLM output. I don't expect it to be right every time, my job is to make it useful without relying on it.

If I make a mistake, I don't just think "I'll do better next time" I think "Why was that even possible".

Sounds like you're already doing great if this only happens occasionally!

Keep ahead of the industry, keep up with blogs and industry influencers for trends, new APIs, patterns, etc; write tests, look at others’ code, practice good coding patterns, always ask a lead/senior to do some pairing when you’re struggling (that’s what I did to help a lot of other developers in my career), ask for feedback/temperature check during 1-on-1s.

Lots of options, some of them require swallowing your pride and putting effort in.

- ship faster, more incremental changes.

- Try to get stuff tested earlier (see point 1)

- if things can get be tested, write tests while working on the code

- split a feature up in chunks and develop parts

- take your time. Pressure of failing sprints (whatever that might actually be caused by) does not help. Smaller changes help with getting others to respect your time too. Everyone is happy when stuff works :), even if its incomplete

Do whatever QA is doing to find your bugs before they find them. Then spend 20% of the time to automate 80% of that work. That might be unit testing, it might be selenium, it might be some different linter settings, but keep the focus on bang for the buck stuff.

Daily scrums, code reviews, and close collaboration should lessen or keep mistakes at bay. I think working closely with the team and having someone to check your work, anticipate missteps early, and provide guidance helps. We can't expect to sit alone and release something great. It's a team sport.

You have to love what you do, otherwise you won't care in the long term.

Once you figure out that the rest is trivial.

No 1 thing you need is seriousness to do high quality work. No need for any checklists, keep working until its 100%

1. If the work is actually hard, your software will have bugs along the way.

2. Big projects do not look finished until the end.

3. If you want to dominate the dojo, only fight children.

4. The creative process is messy and mostly unsuccessful. Assembly lines are neat and predictable…

…the sprint model comes out of consulting where the goal is to do the same thing that’s been done before.

5. QA’s job is to find bugs. They are part of your team. They are not your opponents.

Good luck.

Have more slack/free time. That’s basically it. Anything else is a patch that will fail once you go over capacity.

People habitually run at 90-110% capacity and then wonder why they do bad work.

Not a solution for all of your problems, but it does help me with debugging stuff faster: I have a directory on the desktop called "scratchpad" in which every day I create a new txt file.

During the day I copy-paste every JIRA link I work on there, related class names, APIs, fragments of code I worked on that were particularly tricky, test cases, stacktraces I encountered, useful SQLs, urls to webpages with solutions to problems I had, short descriptions of these problems and my discoveries about them. It's not very verbose, usually it's less than 1 screen worth of notes per day (excluding the stacktraces ;)).

At the end of the work day I save that file as date_short_description.txt - for example 20241121_exception_when_logging.txt.

When I encounter a problem giving me dejavu - the first thing I do is grep in that folder for exceptions, lines in stacktrace, class names, related keywords, etc.

After a few years working at the same company it's surprisingly helpful. I started doing this at my first job after working there for over 2 years and experiencing the "I could swear I dealt with this problem before, but can't rememeber how".

Another tip that is probably personal is - I tend to fall into this habit of "do a very small change, compile, check tests" loop that feels good but is suboptimal if testing/compiling takes a long time. So I try to notice if I fall into that trap and stop myself. It's not the worst thing in the world, but it's wasting time (and giving me an excuse to procrastinate cause "it's compiling").

testing - do unit testing and system testing.

Gradually.

Is it better than raw claude computer use like in this proof of concept?

https://www.reddit.com/r/singularity/comments/1glmle0/claude...

I'm sure that video is full of hallucinations, but it could be an interesting thing to benchmark the whole system just against a prompt with something like that.