> However, as data from that external feed was unavailable, the price of the value of the Index instead defaulted to -1
To me, this reeks of a couple of bad experiences I had repeatedly as a back end developer coordinating with the front end:
1. Demanding that my services always returned correct-looking data, even if it wasn’t available, because they couldn’t (or wouldn’t) handle errors. The story always went like this: if a service returned a 4xx, it would trigger an exception in their front end code, and they didn’t want to tackle the complexity of handling potential errors from a bunch of different back end services. I’ve had this one get escalated to management before, who fortunately supported me.
2. Resisting efforts to ensure that potentially dangerous values were displayed in attention-getting ways. Anything that didn’t look aesthetically harmonious was liable to get “fixed” without any consideration for why it was presented in a visually jarring way in the first place. As a back end engineer I sometimes lost this battle, since it was outside of my jurisdiction, but when I could, I looped in users or a product manager to help stop the madness.
ploxiln 108 days ago [-]
Maybe not as bad, but similar ... I've had a frontend dev say they needed to see designs from the designer before they could add any kind of error message or indicator. The status-quo is just silence, the page just stops doing anything. This is not unusual for various SPAs I've seen around the web. It is unfortunately a typical experience to click something ... no response? click again? wait how long? refresh? hello?
Have the designer design it, sure, but until that happens, you have to show something for auth expired (tab suspended for a long while), connection failed (flaky wifi), or 5xx from service - as much as I may try to make that never happen, it is possible (database failover for a few seconds?), and the design can't just be "there shall be no errors", you can't decide that.
Muromec 108 days ago [-]
That's often a problem with designers -- they only make a happy flow and only the end of it. No in-between states, don't understand the latency and errors exist, don't dig into boundary conditions and edge cases. It's a typical no-my-job-svg response to boot the problem upwards so their manager will make them aware of those pesky things.
stubish 108 days ago [-]
A few decades ago, we chose the most awful color combinations for the UI of an internal system to encourage the designer to get on with it (they wore multiple hats). By the time I'd left a year or so later, the people using the system had not only accepted these disturbing choices, but claimed to have grown fond of them.
shaftway 107 days ago [-]
Google's internal Memegen platform used to have a disturbing amount of #FF00FF in the UI. Since it was internal and not well funded, there was no designer associated with it. The only full-time engineer at the time asked a 20%-er if #FF00FF looked good, partially as a joke, but not knowing the 20%-er was color blind. The 20%-er responded with a strong positive. The full-timer thought that the 20%-er was saying that it would be funny to launch that way as a joke, so all accents in the UI became memegenta.
Source: was a memegeneer.
PyWoody 107 days ago [-]
What in the world is going on with Google search.
I Google'd "#FF00FF" to see how bad it was but was instead returned with a rather pleasant blue. Confused, I tried again. I got a completely different color. Same exact search. Different color. I've done the same, simple "#FF00FF" search and I'm up to five different colors with none of them being magenta.
How do you fuck something so simple as a HEX color code up?
(Hilarious story by the way. For a hot second when I saw the blue come up I thought maybe I was colorblind, too.)
Charlie_e 107 days ago [-]
You're right, that's really weird...
Initially didn't see that 'cause I don't usually include the '#' in my searches so it just comes up with the colorhexa result (which is clearly more accurate lol)
shaftway 106 days ago [-]
There's a long history of Memegen trolling for the lulz.
Hah, I just tried it and got a nice green color. Wtf Google? They really are phoning it in on all levels these days.
DDG showed the correct color fwiw.
TheNewsIsHere 106 days ago [-]
Perhaps it’s just the Bard painting an artistic impression of Gemini using AI.
breckenedge 108 days ago [-]
Stockholm syndrome
jt2190 108 days ago [-]
> if a service returned a 4xx, it would trigger an exception in their front end code, and they didn’t want to tackle the complexity of handling potential errors from a bunch of different back end services
I’ve seen this when the frontend team is building a fat client/smart client/Single Page App but they really want to be building a thin client/dumb client/server-rendered app. Basically it’s a technological mismatch, and client teams feel a lot of pressure to build an SPA but don’t like/want/need the extra compexity that comes with it.
Reviving1514 108 days ago [-]
I'm working on a project where this choice is relevant. Could I ask what you feel should be considered when making this decision? Thank you!
amatecha 108 days ago [-]
Oh man, I would LOVE for all APIs to always return real HTTP response codes. It's crazy frustrating to get a 200 OK with an empty object or something instead of a payload with the expected/agreed-upon format. If someone can parse/handle a response from an API they can absolutely add a bit of code to handle a handful of response codes.
raxxorraxor 107 days ago [-]
The ambition to hide errors from users for example is just completely unhelpful if you think about it.
"Something went wrong". Sure, many or most users won't be helped by a specific error message, but they can use this message to ask someone how does. Especially if large tech companies just forget to offer support, a sensible error message is better than nothing. Sometimes error messages lead you down the wrong path if you don't know the intrinsics of an infrastructure, sure. But I still don't know which brain is responsible for the "guideline" to hide some essential from users. It is just objectively wrong.
It would be childs play to hide the "ugly information" in an extra menu, window, popup or anything. But doing UX isn't an excuse for bad engineering.
brookst 108 days ago [-]
> Demanding that my services always returned correct-looking data, even if it wasn’t available
Ah yes, the age old "special values will signal an error, so we don't have to deal with error handling" approach. Which is always either a pitch for reinventing error handling in novel and ad hoc ways (usually bad), or for disregarding error handling altogether (always bad, sometimes entertaining).
dkarl 108 days ago [-]
Spot on. Part of it is wanting errors-as-values without knowing what that is (which is good and contains a kernel of real insight), and part of it is assuming that error handling can be a negligible fraction of the work (which is the opposite of the truth and can only be achieved by doing a poor job of it.)
108 days ago [-]
alexwasserman 108 days ago [-]
These sorts of errors are frequent and pervasive in finance.
Not just numbers. I worked on a ref dare system with minimal input validation. Copy/pastes would leave in white spaces, new lines, etc. This would then break trading which tried to execute them.
Aged 17/18 at a summer work program at a fund (~2000) I was given Excel and Bloomberg and had to calculate risk across client portfolios. Messed up the manual input of one by a zero resulting in the whole portfolio getting rebalanced, then un-rebalanced.
The same team passed off a trade via paper slip saying it’s yen. The person entering it didn’t recognize the yen currency symbol, assumed it was a 7 and traded the full number prefixed with 7 in yen instead.
Many many stories of many many errors.
z_zetetic_z 108 days ago [-]
I've been in the room when it happened. In one memorable incident, a junior trader I sat opposite bought 100 bn Japanese Yen instead of 10 bn. His excuse? "I lost track of the zeros". We'd only hired the guy because he had a PhD and "PhD's are smart" - lol. In his defense the UI was awful. He left soon after...
seanhunter 108 days ago [-]
Me too. Fatfingers happen much more often than the ones that are reported, partly because it's really hard to make UX that is functional for high-performing individuals trying to respond quickly in pressure situations while also protecting them from the consequences of errors.
For example, in one old FX trading system I know about you would type in the cross you wanted (eg say GBP if you wanted GBP/USD) and the amount and then if you hit enter it would execute. If you hit F5 it would execute that number of million of that cross. So say you wanted 10 million, you could type 10000000 and hit enter or you could just go 10 F5 and it would immediately execute 10 million. (ie if you hit F5 you didn't also need to press enter).
F6 was the same, but for billion. And yes it originally had an "are you sure?" chicken box but there was only one flag to disable all chicken boxes and one of the chicken boxes on another part of the system was such a constant pain in the ass that everyone had chicken boxes disabled. So if you fatfingered and hit F6 when you meant F5 you could literally execute a thousand times as much as you intended.
Other than massive wrong amounts, the other one I've seen a lot is people buying something when they thought they were selling and vice versa.
amaccuish 106 days ago [-]
What is a "chicken box"?
seanhunter 106 days ago [-]
A dialog box allowing the user to “chicken out” if they have second thoughts about some important action. Usually they say something like “Are you sure? yes/no”
amaccuish 105 days ago [-]
Thank you!
coldpie 108 days ago [-]
Japanese uses different "groups" of powers of ten, maybe that tripped him up?
1; 10; 100; 1 x 1000; 10 x 1000
versus
1; 10; 100; 1000; 10000; 1 x 10000; 10 x 10000; 100 x 10000
No, the gui input field das just 100000000000 vs 10000000000. Oops
brookst 108 days ago [-]
So 2048 instead of 1024?
z_zetetic_z 108 days ago [-]
Good one!
taskforcegemini 107 days ago [-]
without any dots? in that case "losing track of zeroes" seems a valid excuse
reducesuffering 106 days ago [-]
PhD's are usually smart. Your business was not, for allowing 100 billion Yen trades by manually entering 12 digit numbers with no punctuation.
miohtama 108 days ago [-]
Most of exchanges and brokers have a dialog window “Looks like unusual order with high price impact - do you really want to execute yes/no”
So definitely an UI issue.
TacticalCoder 108 days ago [-]
A "fat finger" of only 10x is not that much of a fat finger and may not be detected for it's probably nothing out of the ordinary compared to the brokerage account's size. The fat finger in TFA, however, is a quite bigger fat finger: $444 bn instead of $58m.
That's 10 000x. That one is, indeed, a UI issue.
miohtama 108 days ago [-]
Also on fat fingers everyone will find this hilarious
That's not just an UI issue, the backend system responsible of executing the order should have caught the out of limits order.
thombat 108 days ago [-]
Except that apparently they had such warnings for individual trades, but the bundle was implemented as "for(trade in bundle) transact(trade)". Which design has a certain appeal, standing on the shoulders of the peculiar handling of each trade, but with the terrible flaw that the bundle is never considered in its totality.
uses 108 days ago [-]
How do you buy 10,000,000,000 (let alone 10x that much) of something as a junior trader without someone signing off on it? There's nothing at all to stop catastrophic actions being taken by anyone in the organization?
z_zetetic_z 108 days ago [-]
At the time, no. There wasn't any checking. And while it looks like a lot, it wasn't insanely expensive to unwind. Sometimes these kind of mistakes make money. My own 'mistake profit /loss' was around +1m USD.
Ekaros 108 days ago [-]
Yen was probably around hundredth of euro or dollar. So it is 100 million or billion worth of very liquid currency. Very likely among the most liquid trade pairs. As such you need to trade big to make money there. Get timing right and you make it, get it wrong and you lose some.
Symmetry 108 days ago [-]
I'm sure there have been more expensive UX failures (Three Mile Island?) but if there's ever a Wikipedia list of them I'm sure this will be on it.
zerocrates 108 days ago [-]
Therac-25 comes to mind...
Aloha 108 days ago [-]
Therac-25 was at least more deadly.
Also much more complex than a UX failure.
zerocrates 108 days ago [-]
Certainly there were several intersecting issues there, but UX was a significant one.
yummypaint 107 days ago [-]
My main takeaway from that was that software checks aren't an acceptable replacement for hardware interlocks... A lesson we seem to be collectively unlearning
The blockchain turned out to be too complicated for humans to understand, so AI will leverage the blockchain using NoSQL to save us.
stalfosknight 108 days ago [-]
Yes, the solution to this problem has to be to shove AI into Citi's order management system somehow.
lupire 108 days ago [-]
Probably. AI and LLM are pretty good at detecting extreme outliers and staying on the highly probable path.
tedunangst 108 days ago [-]
You think the problem here is that the outlier wasn't detected?
brookst 108 days ago [-]
If by "detected" we consider the E2E chain of humans and computers, then yes, that was the problem.
108 days ago [-]
tremorscript 108 days ago [-]
I like github's solution to deleting a repository.
A popup makes you type the repository name before confirming deletion.
In this case, if the value is unusually high say greater than 100 billion, make the trader type 100 billion before proceeding.
I confess that I also ignore popups and just click ok. This is where i appreciate github asking me to type the name of the repository, just to make sure that I know what I am doing.
blitzar 108 days ago [-]
I always just copy the thing it told me to write and paste into the relevant field - often without reading or comprehending what it says.
DANmode 108 days ago [-]
How long are these messages that your reading speed doesn't burn through it faster than it takes to click or tap the button...?
tremorscript 108 days ago [-]
Peter see OK button. Peter click OK button. Peter no read or have a thought.
tedunangst 108 days ago [-]
As for the second story, "I’m kind of with Revolut here, but on the other hand, if they’re so sure it’s a scam maybe they should just not allow the transfer? Even if the customer sends the selfie? Perhaps you want a hard block here."
Do people want a block? Every story about a bank blocking a transfer draws tons of outrage. It's my money, I can send it where I want, no questions, you can't stop me, how dare you.
ptsneves 104 days ago [-]
In millennium bank Poland every time I need to move a bigger amount of money they ask me for my handwritten signature which always fails to validate. Of course the more I fail the more I get nervous about it and fail to draw my signature appropriately. If I need to move big amounts it is because I need to, like buying a house or something life changing.
Several times I thought what am I going to do now? What is my appeal? The appeal is simple: ask to change the signature beforehand and the proceed with the operation. Damn stupid.
It is like presenting my authentication token, failing and then escalating my privileges to obtain the higher order verification token required.
aidenn0 107 days ago [-]
It's lose-lose. You get punished for the scams you stop and punished for the scams you don't stop.
sickofparadox 108 days ago [-]
"You get 711 alerts, you only see 18 of them, you are like “ehh 18 alerts is pretty much the normal number,” you override them all without reading."
I believe this is called an 'alert that cried wolf'.
jh00ker 108 days ago [-]
Humans are bad at processing large sets of similar data occurring repeatedly.
It comes up everywhere:
- On-Call alerts received by my engineering team for our microservices that usually self-resolve result in the first action being taken by the engineers to be "just wait and see if it's a false alarm." We work to reduce the number alerts overall to reduce the noise.
- I'm reminded of "Cigna saves millions by having its doctors reject claims without reading them" https://news.ycombinator.com/item?id=35304017 In order to keep up with the claims, they just auto-rejected them to see if they were appealed in a way to filter out the "noise."
- We hear so much about Tesla's "FSD (Supervised)" and it's request that drivers "don't become complacent" but it happens anyway. After enough time behind the wheel with FSD enabled, we are swayed by the string of successes to become overly trusting of the tech.
> On Tuesday, the National Transportation Safety Board said that a crash last year on the Washington subway system that killed nine people had happened partly because train dispatchers had been ignoring 9,000 alarms per week. Air traffic controllers, nuclear plant operators, nurses in intensive-care units and others do the same.
HL33tibCe7 108 days ago [-]
> nurses in intensive-care units and others do the same.
The last time I was in hospital, I came out the next day and my ears were ringing for a couple of days from the _constant_ ringing of alarms.
amatecha 108 days ago [-]
Every time I've been in a hospital (visiting people), I have a frequent sensation of wanting to get out of there. I hope/imagine I will never need to be in a hospital, because I know it will be hell for me. I have extremely good hearing, and am very affected by sound. Visiting people in hospital requires serious effort from me to maintain focus on the person and those I'm there with, and ignoring such a shocking degree of noise I can barely believe it's the accepted norm. I can't believe how many devices and processes purposely make noise as a part of _normal operation_, where there's not even anything amiss!
blackeyeblitzar 108 days ago [-]
Yes I really hate that at hospitals. I am certain it is bad for health and recovery of patients and unnecessarily increases stress for everyone.
nucleardog 107 days ago [-]
I have no doubt about this.
My wife was in the hospital because she’d essentially stressed herself to the point of a heart arrhythmia. The irregular rhythm meant the equipment was basically useless at accurately determining her heart rate and the readings fluctuated wildly.
So what did she do for several hours? Laid in a bed anxious about the medical concerns, anxious about life, and listened to the monitoring equipment go off multiple times a minute as she crossed various alert thresholds, went back under them, crossed them again, repeat the entire time she was there.
I asked the staff to turn the alarms off or at least adjust the thresholds.
They just short of flat out said they wouldn’t because if they disabled or adjusted them and anything happened it would be on their head.
So my wife spent half a day being told to try and relax while the machine monitoring her heart and respiration and blood pressure constantly screamed at her that everything was wrong.
mgkimsal 108 days ago [-]
and... 'fixing' it can cause its own issues.
I've been involved in some systems that routinely spit out dozens of warnings per day. After 'fixing' some of them - maybe getting a system down to a few per week, bug reports started coming in that the system was 'broken'. Because people noticed the boxes and messages they routinely ignored were gone, and this must be a problem. Lots of re-education may need to happen on a large scale to actually 'fix' alarm fatigue across the board.
Aloha 108 days ago [-]
I work on a system with notoriously noisy alarming and messaging logging - my first step is to tell the customer to ignore all of it.
I tell them to do two things to tell them how to check system health.
1. Is it working normally? if so, then nothing is wrong.
2. Walk by the hardware once a week and check for idiot lights, check the system dashboard if one of the idiot lights is on. If no error is found, its a hardware problem (failed supply, drive, fan), if an error is found it's a failed server - either way, call us.
There are a handful of cases not fixed by this, but they're limited to time sync failures - which are critical, but generates no user facing alarms.
tristor 108 days ago [-]
This triggered a repressed memory. I was once on an ops team responsible for an application that had been turned over to us written in Java. The application ran in Tomcat, and prior to turning it over to us, the external vendor had "helpfully" built some monitoring and alerting for the application. One of the metrics they monitored was how many errors per minute and per hour were happening the application's logs. When they turned this application over to us, they did not properly hand over the monitoring system or even tell us that it existed, and it was sending alerts to another external vendor team which had no association to my ops team.
Several years went by... then because we finally had the time our ops team decided to audit and improve this application, including rewriting significant portions of its code as was pretty typical when we took over an application built by an external vendor. Long story short, we resolved almost all of the errors by the expediency of simply correctly interacting with the database behind the application instead of relying on whatever horrific dumpster fire output to the DB that Hibernate was doing. That's when things got super interesting, because the external vendor team that was receiving these monitoring alerts (unbeknownst to my team) had more than 100% turnover in the intervening period of time, having lost all knowledge about this, but suddenly starting getting a bunch of critical urgency alerts going off because the application was no longer emitting the amount of errors expected for the alarm thresholds. This ended up triggering a massive company-wide incident call, even though there was no external customer impact. I'm leaving a lot of details out, but let's just say it sucked up days of my life and was a massive waste of time for all of that.
Fun example of fixing something and causing an "issue" because behavior changed from expectations/baseline.
maicro 108 days ago [-]
"The errors let you know it's working; it's when the errors stop you have to worry."
opwieurposiu 108 days ago [-]
For old cars we say say "If there ain't no oil under it, then there ain't no oil in it."
108 days ago [-]
ryandrake 108 days ago [-]
I always wondered: Since Alarm Fatigue is well known, why do UX designers and/or product owners keep insisting on adding new alarms for things? Surely we know they increasingly don't work, the more you have.
thephyber 108 days ago [-]
Alarms are easy for a single person to add.
The better solution is to redesign / engineer systems which automatically solve the alarm condition so no person needs to know about the alarm. That usually requires many people to work together and requires far more complexity to solve, both initially and in ongoing upkeep.
mrguyorama 107 days ago [-]
Because modern design philosophy has, as a rule, thrown everything we learned before 2010 out the window because that's not what google does.
"But the A/B tests show consumers prefer it!". Oh? So you have a degree in stats and experience running scientific tests? No? You're just a programmer who only knows how to enable the A/B test feature of your favorite javascript library?
Your A/B tests aren't testing what you think they are testing.
BobaFloutist 107 days ago [-]
The expected marginal benefit of any given individual alarm is positive.
it's extremely hard to find the point where it becomes negative.
Think of it like emails, or texts, or calls: What's the exact number per day where you stop paying attention to them?
bombcar 108 days ago [-]
Because if someone dies because you didn't alarm an alarm, you get yelled at.
If someone dies because they ignored an alarm you did alarm, that's on them.
nucleardog 107 days ago [-]
There’s some small fraction where someone believes it would be helpful but was mistaken. What you’re describing is definitely the vast majority.
When something unexpected or out of the ordinary happens, what do you do about it?
- Nothing? Why did you do nothing? This was clearly a problem. This is your fault.
- Figure out appropriate error handling? That’s hard work.
- Just throw up an alert on everything and make it someone else’s job to sort through it all? Perfect, job done.
Arrath 108 days ago [-]
Alarm Fatigue
pjacotg 108 days ago [-]
There's a 99% visible episode [1] on this very issue. Worth a listen!
When entering and exchanging potentially very large money amounts, it behooves risk management of entered, encoded, and transmitted prices carefully like the following: NDC.
N = Length of string D
D = [0-9]+\.[0-9]+
C = 2 check digits using IBAN method against ND
csunbird 108 days ago [-]
> When the trader checked the value of the inputted basket, they were presented with a figure of negative 58 million for the value of the basket (58 million multiplied by -1). The trader saw a ValAtBM of -58,000,000, which was the number they expected to see, and thus they clicked Execute to continue to the next check.
It wouldn't help.
thombat 108 days ago [-]
It doesn't seem that this would have helped here: the trader entered exactly the number that they intended to, just that their intent was misconceived.
hi-v-rocknroll 108 days ago [-]
Perhaps and perhaps another compounding factor was error-prone UX such as not displaying total estimates prominently or the presence of options leading to order-of-magnitude differences.
But the intent of what I suggested is to guard against many classes of errors including data entry, storage, transmission, and interpretation.
vlovich123 108 days ago [-]
Stupid question since I’m not in the fintech space. Why is a trader responsible for manually filling out an order to hedge against a sell order from a customer?
JumpCrisscross 108 days ago [-]
> Why is a trader responsible for manually filling out an order to hedge against a sell order from a customer?
The only manual component is specifying the size. As to why the client isn't doing it, this order might have been placed over the phone. Or it may be part of a more-complicated strategy that required some finesse.
To me, this reeks of a couple of bad experiences I had repeatedly as a back end developer coordinating with the front end:
1. Demanding that my services always returned correct-looking data, even if it wasn’t available, because they couldn’t (or wouldn’t) handle errors. The story always went like this: if a service returned a 4xx, it would trigger an exception in their front end code, and they didn’t want to tackle the complexity of handling potential errors from a bunch of different back end services. I’ve had this one get escalated to management before, who fortunately supported me.
2. Resisting efforts to ensure that potentially dangerous values were displayed in attention-getting ways. Anything that didn’t look aesthetically harmonious was liable to get “fixed” without any consideration for why it was presented in a visually jarring way in the first place. As a back end engineer I sometimes lost this battle, since it was outside of my jurisdiction, but when I could, I looped in users or a product manager to help stop the madness.
Have the designer design it, sure, but until that happens, you have to show something for auth expired (tab suspended for a long while), connection failed (flaky wifi), or 5xx from service - as much as I may try to make that never happen, it is possible (database failover for a few seconds?), and the design can't just be "there shall be no errors", you can't decide that.
Source: was a memegeneer.
I Google'd "#FF00FF" to see how bad it was but was instead returned with a rather pleasant blue. Confused, I tried again. I got a completely different color. Same exact search. Different color. I've done the same, simple "#FF00FF" search and I'm up to five different colors with none of them being magenta.
How do you fuck something so simple as a HEX color code up?
(Hilarious story by the way. For a hot second when I saw the blue come up I thought maybe I was colorblind, too.)
Here's a color link so nobody else has to struggle: https://www.colorhexa.com/ff00ff
DDG showed the correct color fwiw.
I’ve seen this when the frontend team is building a fat client/smart client/Single Page App but they really want to be building a thin client/dumb client/server-rendered app. Basically it’s a technological mismatch, and client teams feel a lot of pressure to build an SPA but don’t like/want/need the extra compexity that comes with it.
"Something went wrong". Sure, many or most users won't be helped by a specific error message, but they can use this message to ask someone how does. Especially if large tech companies just forget to offer support, a sensible error message is better than nothing. Sometimes error messages lead you down the wrong path if you don't know the intrinsics of an infrastructure, sure. But I still don't know which brain is responsible for the "guideline" to hide some essential from users. It is just objectively wrong.
It would be childs play to hide the "ugly information" in an extra menu, window, popup or anything. But doing UX isn't an excuse for bad engineering.
Ah yes, the age old "special values will signal an error, so we don't have to deal with error handling" approach. Which is always either a pitch for reinventing error handling in novel and ad hoc ways (usually bad), or for disregarding error handling altogether (always bad, sometimes entertaining).
Not just numbers. I worked on a ref dare system with minimal input validation. Copy/pastes would leave in white spaces, new lines, etc. This would then break trading which tried to execute them.
Aged 17/18 at a summer work program at a fund (~2000) I was given Excel and Bloomberg and had to calculate risk across client portfolios. Messed up the manual input of one by a zero resulting in the whole portfolio getting rebalanced, then un-rebalanced.
The same team passed off a trade via paper slip saying it’s yen. The person entering it didn’t recognize the yen currency symbol, assumed it was a 7 and traded the full number prefixed with 7 in yen instead.
Many many stories of many many errors.
For example, in one old FX trading system I know about you would type in the cross you wanted (eg say GBP if you wanted GBP/USD) and the amount and then if you hit enter it would execute. If you hit F5 it would execute that number of million of that cross. So say you wanted 10 million, you could type 10000000 and hit enter or you could just go 10 F5 and it would immediately execute 10 million. (ie if you hit F5 you didn't also need to press enter).
F6 was the same, but for billion. And yes it originally had an "are you sure?" chicken box but there was only one flag to disable all chicken boxes and one of the chicken boxes on another part of the system was such a constant pain in the ass that everyone had chicken boxes disabled. So if you fatfingered and hit F6 when you meant F5 you could literally execute a thousand times as much as you intended.
Other than massive wrong amounts, the other one I've seen a lot is people buying something when they thought they were selling and vice versa.
1; 10; 100; 1 x 1000; 10 x 1000
versus
1; 10; 100; 1000; 10000; 1 x 10000; 10 x 10000; 100 x 10000
https://en.wikipedia.org/wiki/Japanese_numerals#Large_number...
So definitely an UI issue.
That's 10 000x. That one is, indeed, a UI issue.
https://thedailywtf.com/articles/Special-Delivery
Also much more complex than a UX failure.
In this case, if the value is unusually high say greater than 100 billion, make the trader type 100 billion before proceeding.
I confess that I also ignore popups and just click ok. This is where i appreciate github asking me to type the name of the repository, just to make sure that I know what I am doing.
Do people want a block? Every story about a bank blocking a transfer draws tons of outrage. It's my money, I can send it where I want, no questions, you can't stop me, how dare you.
I believe this is called an 'alert that cried wolf'.
It comes up everywhere:
- On-Call alerts received by my engineering team for our microservices that usually self-resolve result in the first action being taken by the engineers to be "just wait and see if it's a false alarm." We work to reduce the number alerts overall to reduce the noise.
- I'm reminded of "Cigna saves millions by having its doctors reject claims without reading them" https://news.ycombinator.com/item?id=35304017 In order to keep up with the claims, they just auto-rejected them to see if they were appealed in a way to filter out the "noise."
- We hear so much about Tesla's "FSD (Supervised)" and it's request that drivers "don't become complacent" but it happens anyway. After enough time behind the wheel with FSD enabled, we are swayed by the string of successes to become overly trusting of the tech.
> On Tuesday, the National Transportation Safety Board said that a crash last year on the Washington subway system that killed nine people had happened partly because train dispatchers had been ignoring 9,000 alarms per week. Air traffic controllers, nuclear plant operators, nurses in intensive-care units and others do the same.
The last time I was in hospital, I came out the next day and my ears were ringing for a couple of days from the _constant_ ringing of alarms.
My wife was in the hospital because she’d essentially stressed herself to the point of a heart arrhythmia. The irregular rhythm meant the equipment was basically useless at accurately determining her heart rate and the readings fluctuated wildly.
So what did she do for several hours? Laid in a bed anxious about the medical concerns, anxious about life, and listened to the monitoring equipment go off multiple times a minute as she crossed various alert thresholds, went back under them, crossed them again, repeat the entire time she was there.
I asked the staff to turn the alarms off or at least adjust the thresholds.
They just short of flat out said they wouldn’t because if they disabled or adjusted them and anything happened it would be on their head.
So my wife spent half a day being told to try and relax while the machine monitoring her heart and respiration and blood pressure constantly screamed at her that everything was wrong.
I've been involved in some systems that routinely spit out dozens of warnings per day. After 'fixing' some of them - maybe getting a system down to a few per week, bug reports started coming in that the system was 'broken'. Because people noticed the boxes and messages they routinely ignored were gone, and this must be a problem. Lots of re-education may need to happen on a large scale to actually 'fix' alarm fatigue across the board.
I tell them to do two things to tell them how to check system health.
1. Is it working normally? if so, then nothing is wrong.
2. Walk by the hardware once a week and check for idiot lights, check the system dashboard if one of the idiot lights is on. If no error is found, its a hardware problem (failed supply, drive, fan), if an error is found it's a failed server - either way, call us.
There are a handful of cases not fixed by this, but they're limited to time sync failures - which are critical, but generates no user facing alarms.
Several years went by... then because we finally had the time our ops team decided to audit and improve this application, including rewriting significant portions of its code as was pretty typical when we took over an application built by an external vendor. Long story short, we resolved almost all of the errors by the expediency of simply correctly interacting with the database behind the application instead of relying on whatever horrific dumpster fire output to the DB that Hibernate was doing. That's when things got super interesting, because the external vendor team that was receiving these monitoring alerts (unbeknownst to my team) had more than 100% turnover in the intervening period of time, having lost all knowledge about this, but suddenly starting getting a bunch of critical urgency alerts going off because the application was no longer emitting the amount of errors expected for the alarm thresholds. This ended up triggering a massive company-wide incident call, even though there was no external customer impact. I'm leaving a lot of details out, but let's just say it sucked up days of my life and was a massive waste of time for all of that.
Fun example of fixing something and causing an "issue" because behavior changed from expectations/baseline.
The better solution is to redesign / engineer systems which automatically solve the alarm condition so no person needs to know about the alarm. That usually requires many people to work together and requires far more complexity to solve, both initially and in ongoing upkeep.
"But the A/B tests show consumers prefer it!". Oh? So you have a degree in stats and experience running scientific tests? No? You're just a programmer who only knows how to enable the A/B test feature of your favorite javascript library?
Your A/B tests aren't testing what you think they are testing.
it's extremely hard to find the point where it becomes negative.
Think of it like emails, or texts, or calls: What's the exact number per day where you stop paying attention to them?
If someone dies because they ignored an alarm you did alarm, that's on them.
When something unexpected or out of the ordinary happens, what do you do about it?
- Nothing? Why did you do nothing? This was clearly a problem. This is your fault. - Figure out appropriate error handling? That’s hard work. - Just throw up an alert on everything and make it someone else’s job to sort through it all? Perfect, job done.
[1] https://99percentinvisible.org/episode/sound-and-health-hosp...
[0]https://en.wikipedia.org/wiki/Alarm_fatigue
N = Length of string D
D = [0-9]+\.[0-9]+
C = 2 check digits using IBAN method against ND
It wouldn't help.
But the intent of what I suggested is to guard against many classes of errors including data entry, storage, transmission, and interpretation.
The only manual component is specifying the size. As to why the client isn't doing it, this order might have been placed over the phone. Or it may be part of a more-complicated strategy that required some finesse.